NSK磨煤機動態分離器軸承BA600-1EP5現貨銷售，無錫科瑞棋傳動機械有限公司常年備貨，庫存充足，交貨期短，售后服務好的，我們本著“一切追求高質量，用戶滿意為宗旨”的精神，以“優惠的價格、周到的服務、可靠的產品質量”的原則為您服務。咨詢熱線：  沈經理

更多產品詳情請直接點擊我司官網：

動態分離器使用一對脂潤滑角接觸球軸承，軸承放置在結構件制成的軸承座中，上、下軸承各有一個熱電阻用于監測軸承溫度。為了保護軸承，上、下各有一個油封。迷宮氣封的設計也是為了防止粉塵進入驅動裝置。

TheDynamic Classifier use two grease lubricated angular contact ball bearingsinstalled in fabricated steel are two thermocouples to monitor the temperature of the two ball protect the bearings,upper and lower oil seals are nth design airselas are also used to seal the drive assembly from coal dust.

變頻電機和渦輪蝸桿減速器通過聯軸器連在一起，變頻電機通過變頻器改變頻率從而改變轉速。渦輪蝸桿減速器輸出軸上安裝主動輪，通過皮帶帶動與轉子裝置連接在一起的從動輪，從而使轉子轉動。轉子的旋轉方向為從磨煤機上方往下看為順時針方向。

The Variable Frequency Motor and Worm Gear Reducer areconnected by a frequency of the motor is changed by the VFD andthen the speed of the rotor can be changed.A driver sheave is assembled at theoutput shaft of the worm gear reducer,and it drives the drived sheave which is connectedwith the rotor assembly ,and so the rotor can Dynamic ClassifierRotor is designed to rotate in a clock-wise direction when viewed from abovethe mill.

變頻器采用成熟技術制成，與機械變速相比，變頻器幾乎不用維護，可靠性很高。

VFDhave high reliability using proven technology with little or no requiredmaintenance as compared to mechanical speed control.

轉子采用耐磨合金鋼制成，整體錐形結構，設計壽命超過50000小時。

Therotor design is a multi bladed rotor with a basic conical isfabricated from an abrasion resistant alloy steel and designed with livesexceeding 50,000 hours.

無錫科瑞棋傳動機械有限公司銷售NSK BA600-1EP5，針對NSK BA600-1EP5客戶提供相關咨詢服務，需要了解NSK BA600-1EP5型號尺寸、重量、價格、安裝、維護等資料請與我們聯系。

 

相關產品

 

 

公司簡介

 

其它地區 分離軸承 類似信息：